For example, if your PC has the IP address 192.168.1.123, you’d enter 192.168.1.255 as the broadcast address. To do this, you’ll need to forward the port to the “broadcast address,” which will broadcast the packet to all computers on a network. This is known as a “subnet directed broadcast.” The Wake-on-LAN packet must be forwarded to every device running behind your router, and a device will only wake up if the information in the WoL packet matches it. You’ll need to forward a UDP port to all IP addresses behind your router - you can’t just forward to a specific IP address. Many utilities use ports 7 or 9, but you can use any port you like for this. Wake up the target computer via its public address.Note: You can use TeamViewer´s Wake on LAN feature with the most recent version of TeamViewer 13 as well as TeamViewer 12, 11, 10 and 9.Choose one of the methods depending on the circumstances.Wake-On-LAN uses UDP.
Wake up a computer ( hereafter called the target computer ) via another computer within the same network. How to use Wake on LANWake-on-LAN can be used through two different methods. Windows and Linux PCs, however, can be woken up from sleep and hibernation mode as well as being fully powered down, so long as the hardware supports this. Macs can only be woken up from sleep mode. This means you can control an offline computer remotely by waking it up first be fore you establish a connection to it.You can initiate the wake-up request from another Windows or Mac computer, or even from an Android or iOS device running the TeamViewer Remote Control app.Note: I t’s not possible to wake up a Mac computer that is fully powered down, as Apple doesn’t allow this. Read this article in This article applies to all TeamViewer users.GeneralYou can turn on a sleeping or powered-off computer using TeamViewer ’s feature.
0 kommentar(er)
